+

OCS PTS Control 

  • Operation via Touch Panel
  • Animated view of the system with all important
    control elements and system status information
  • Optical and acustical alarm function
+

OCS Online Hopper*
*Special set-up (different configurations available on request)
The following is a more simplified standard:

+

OCS PTS Pipeline

  • Variations: tubing or piping
+

OCS PTS Diverter

  • 2-way, 3-way or 4-way diverter
+

OCS Offline Tank

  • Further variation see below – REP and Offline Tank:

OCS Optical Control Systems GmbH > Products > Pellet Transport System (PTS)

Pellet Transport System (PTS)

The OCS Pellet Transport System (PTS) is a control system that ensures the continuous and automatic transport of plastic granules (pellets) between production lines and measuring systems. The pellets from the production line are removed by pneumatic samplers. The samples are transported through special conveyor pipes, distributed and fed to the corresponding measuring system. This ensures a gentle transport of the pellets to avoid dust and streamers.

Features

  • Individual and fully automated transport system for supplying the measuring systems
  • Enables timely readjustment in case of parameter variations (minimisation of scrap)
  • Simple operation via touch panel with optical and acoustic alarm functions
  • Optimised transport speed for every application

Compatible with

  • All OCS Equipment

Sales Team

T +49 2302 95622-0
F +49 2302 95622-33
info@ocsgmbh.com
www.ocsgmbh.com

Address

OCS Optical Control Systems GmbH
Wullener Feld 24
58454 Witten
Germany

Technical Details

Transportation distance
Standard up to 250 m (larger distances depending on product/application)
X

Optional

  • Customer-specific data preparation and transmission
  • Remote control function
  • Dedusting device, drying device, cooling or tempering of granules
  • Manual/representative sampling (e.g. for retained samples)
  • Storage container for flushing or calibration material
  • Individual sampling points

Similar Products

Blown Film Line

The OCS Blown Film Line is used to carry out optical and physical property measurements of polymers in the production of high-quality blown films (blowing, [...]

Cast Film Line

The OCS Cast Film Line is used to perform optical and physical property measurements of polymers in the production of high-quality cast (flat) films (extrusion, [...]

Tape Line (TCA®)

The OCS Tape Line Type TCA® is used for testing transparent polymer films (tape). It consists of the OCS Measuring Extruder (ME) and the OCS [...]

Tape Line (SSA®)

The OCS Tape Line type SSA® is used specifically to detect surface irregularities (pips ) on non-transparent polymer films (tape) in the wire and cable [...]

Pellet Analysing System (PA66)

The modular OCS Pellet Analysing System (PA66) consists of the following components: The Pellet Scanner (PS25C) detects impurities that show a colour deviation from the [...]

Pellet Scanner (PS800C)

With the OCS Pellet Scanner (PS800C), highly transparent and opaque pellets can be analysed in free fall using two separate colour line scan cameras (inspection [...]

Pellet Scanner (PS200C)

The OCS Pellet Scanner (PS200C) can analyse opaque pellets on a rotating plate using of a colour matrix camera. The system detects impurities that show [...]

Pellet Scanner (PS25C)

With the OCS Pellet Scanner (PS25C), highly transparent and opaque pellets can be analysed on a vibration plate using a colour matrix camera. The system [...]

Melt Flow Measurement System (OP5)

The OCS Melt Flow Measurement System (OP5) allows the measurement of the Melt Index (MI) of polymer powder or pellet samples. The time between sampling [...]

X-Ray Pellet Scanner (XP7)

The new OCS XP7 X-Ray Pellet Scanner detects metal defects in highly transparent and opaque pellets, which improves the polymer and product quality. The innovative [...]